Table of Contents
Advertisement
DVR-9404~9408~9416
Chapter 5 Remote PlayBack System
5.1 RPB Setup and Installation
Before you can run RPB functions in GV-System both RPB application and RPB server should be
properly setup and installed first. This section will explain the detail on how to setup RPB
workstation and to establish its connection to the GV-System.
5.1.1 Install RPB Application
The RPB application is included in your GV-System CD-ROM. This Application should be
installed in a separated PC with TCP/IP network access. Please make sure your PC meets
the minimum system requirement indicated below before proceeding to the installation.
System Requirement
OS:
CPU:
Memory:
Hard Disk:
VGA:
Network:
Installation
1.
Insert GV-System CD into the CD-ROM drive of the remote workstation and run
Setup.exe in the CD-ROM root directory.
2.
In the setup dialog box select "Remote Playback. Client Site" and click [Next].
Figure 5-2: Setup dialog box
3.
Click [Browse] if you wish to specify another destination directory otherwise click [Next]
and follow the rest of the instruction to complete the installation.
Page 60
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE
Win 98SE, ME, 2000, XP
Pentium 500 (minimum)
128 MB RAM
20 GB (minimum)
NVIDIA GeForce II 32MB at 800 x 600 resolution (minimum)
TCP/IP
Mace Security Products
`
Advertisement
Table of Contents
