Mace DVR-9404~9408~9416 User Manual page 41

DVR-9404~9408~9416
Chapter 3 Main System Application
[Input Configuration]:
If you have PT811 module connected and is properly setup within your system, then you will
be able to configure its functions in the input configure area. Each PT811 can connect up to 8
input devices. You may use the [Input Select Button] to choose the device you wish to
configure.
Name:
Signal Type:
Rec Video:
Page 36
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE
Select I/O Module
Select Com Port
Select Address
Format Address
Add Button
Module List Window
Input Select Button
Select Output Address
You can specify a name for each input device in the Name text column.
Select signal type for your input device. You may use the [Apply All]
button to apply your selection to all input devices.
Check this option if you wish to use this device to trigger recording
(sensors or detectors). You may select which camera to record in the
Camera Select drop down menu and specify the recording delay.
Mace Security Products
Apply All
Recording Delay
Select Camera
Choose Alarm Type
Select Hotline or Email