Related Manuals for Mace 80355
Summary of Contents for Mace 80355
- Page 2 15. Battery cover 16. Terminal block 17. 9V Battery...
- Page 4 Your message should be similar to: “[Your nameʼs ] security system has been activated. Please enter a command.” (Optionally you may wish to list the commands: “1#”-Monitor Room, “2#”-Broadcast, “3#”-End Call or “6#”-Disarm System.)
- Page 5 screws...
- Page 6 Have the person on the other end enter one of the following commands: “1#”-Monitor Room,“2#”-Broadcast,“3#”-End Call or “6#”-Disarm System.
- Page 9 When the siren feature is turned on, the Control Unit will sound an alarm when the security system is activated, and then dial the telephone number(s) contained in the list of telephone number(s). If the security system is not “DISARMED” after activation, the alarm will sound for 30 seconds, remain silent for 30 seconds, sound again for 30 seconds, and then will reset.
- Page 10 “1” then “#”, “2” then “#”, “5” then “#”, “6” then “#”, “3” then “#”.
- Page 11 ress until until...
- Page 12 To purchase additional security items, including accessories for your alarm system, please visit www.mace.com 610-01808-006R...