Troubleshooting; Q&A - Nokia N93 Manual

Troubleshooting

Q&A
Access codes
Q: What is my password for the lock, PIN, or PUK codes?
A: The default lock code is 12345. If you forget or lose the
lock code, contact your device dealer.
If you forget or lose a PIN or PUK code, or if you have not
received such a code, contact your network service
provider.
For information about passwords, contact your access
point provider, for example, a commercial internet service
provider (ISP) or wireless service provider.
Application not responding
Q: How do I close an application that is not responding?
A: To open the application switching window, press and hold
. Scroll to the application, and press
application.
Bluetooth connectivity
Q: Why can't I find my friend's device?
A: Check that both devices have activated Bluetooth
connectivity.
Check that the distance between the two devices is not
over 10 meters (33 feet) and that there are no walls or
other obstructions between the devices.
118
Check that the other device is not in the hidden mode.
Check that both devices are compatible.
Q: Why can't I end a Bluetooth connection?
A: If another device is connected to your device, you can either
end the connection using the other device or by
deactivating Bluetooth connectivity. Select
Bluetooth
Browser services
Q: What do I do if the following message is displayed:
access point defined. Define one in Services
A: Insert the correct browser settings. Contact your service
provider for instructions.
Camera
Q: Why do images look smudgy?
to close the
A: Remove the protective plastic film covering the display and
camera. Ensure that the camera lens protection window is
clean.
Q: Why is there audible noise from the camera when
autofocus or optical zoom is used?
A: Zoom and AF lens movement causes mechanical noise.
S elect Options
recording
by lens movement when recording.
> Off.
> Settings > Optical zoom during
> to eliminate mechanical noise caused
Off
Connect. >
No valid
settings.?