Switching Off The Printer - AGFA DRY 1.4 User Manual

Switching off the printer

When you want to switch off the printer, the printer will first finish his current
print job. Queued print jobs will be stored on internal media and will be
resumed next time the printer is switched on.
Press the Power/Reset button to switch.
• If the printer is printing, it will finish that print job:
• When the printer is ready, it shuts down immediately:
Note: After switch off, the device is still in stand-by mode. To
remove the device from the mains supply disconnect the mains
plug.
DRY 1.4, DRY 2.4 | Introduction | 71
3631B EN 20210601 1655