Unpacking And Verifying The Shipped Contents - Cisco NCS 540 Installation Manual

Preparing for Installation

Unpacking and Verifying the Shipped Contents

Figure 5: Shipping Contents of the Router
When you receive your chassis, perform the following steps:
1. Inspect the box for any shipping damage. If there is obvious physical damage, contact your Cisco service
representative.
2. Unpack the router.
3. Perform a visual inspection of the chassis.
4. Use below table to check the contents of the router shipping container. Do not discard the shipping
container. You will need the container if you move or ship the router in the future.
Cisco Network Convergence System 540 Passive Cooled Small Density Routers Hardware Installation Guide
Unpacking and Verifying the Shipped Contents
21