Windows Vista - Linksys E3000 User Manual

Linksys E3000
6 . Click Finish .
Click Finish
Access Mapped Drive
1 . On your desktop, click the Windows Explorer icon .
Windows Explorer Icon
NOTE: If the Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer .
2 . Double-click the mapped drive to access it .
Double-Click Mapped Drive
High Performance Wireless-N Router
Appendix B: How to Install and Access USB Storage

Windows Vista

Install the USB Storage Device
1 . Make sure your computer has a wired or wireless
connection to the Router .
2 . Connect an external USB hard disk drive or USB flash
disk to the USB port of the Router .
USB Internet
Access the USB Storage Device
1 . On your desktop, double-click the Computer icon .
NOTE:
If the Computer icon is not displayed,
then go to Start > All Programs > Accessories
> Windows Explorer .
2 . In the Address field, enter the local IP address of the
Router:
\\xxx.xxx.xxx.xxx
The default is 192.168.1.1 . You can change this IP
address on the Setup > Basic Setup screen; refer to
Setup > Basic Setup, page 13 .
Enter Local IP Address of Router
NOTE:
Another option is to use the default server
name of the Router . In the Address field, enter:
\\Ciscoxxxxx (xxxxx
five digits of the Router's serial number .)
If you used the setup software for installation,
then enter the name of your wireless network
(up to 15 characters) in the Address field .
12VDC
Reset
4 3 Ethernet 2 1
Power
Computer Icon
represents the last
47