Linksys E3000 User Manual page 26

Linksys wireless router user guide
Hide thumbs Also See for E3000:
Table of Contents

Advertisement

Linksys E3000
WPA Personal
NOTE:
If you are using WPA2 or WPA, each
device in your wireless network MUST use the
same WPA method and shared key, or else the
network will not function properly .
WPA Personal
Passphrase
Enter a passphrase of 8-63 characters .
WEP
WEP is a basic encryption method, which is not as secure
as WPA .
IMPORTANT:
If you are using WEP encryption,
each device in your wireless network MUST
use the same WEP encryption method and
encryption key, or else your wireless network will
not function properly .
WEP
Encryption
Select a level of WEP encryption, 64 bits
10  hex digits or 128 bits 26 hex digits . The default is
64 bits 10 hex digits .
Passphrase
Enter a Passphrase to automatically generate
WEP keys . Then click Generate .
High Performance Wireless-N Router
Chapter 3: Advanced Configuration
Key 1-4
If you did not enter a Passphrase, enter the WEP
key(s) manually .
TX Key
Select a default TX (Transmit) Key (choose which
Key to use) . The default is 1 .
RADIUS
This option features WEP used in coordination with a
RADIUS server . (This should only be used when a RADIUS
server is connected to the Router .)
IMPORTANT:
If you are using WEP encryption,
each device in your wireless network MUST
use the same WEP encryption method and
encryption key, or else your wireless network will
not function properly .
RADIUS
RADIUS Server
Enter the IP address of the RADIUS server .
RADIUS Port
Enter the port number of the RADIUS
server . The default is 1812 .
Shared Key
Enter the key shared between the Router
and the server .
Encryption
Select a level of WEP encryption, 64 bits
10  hex digits or 128 bits 26 hex digits . The default is
64 bits 10 hex digits .
Passphrase
Enter a Passphrase to automatically generate
WEP keys . Then click Generate .
Key 1-4
If you did not enter a Passphrase, enter the WEP
key(s) manually .
TX Key
Select a default TX (Transmit) Key (choose which
Key to use) . The default is 1 .
Click Save Settings to apply your changes, or click Cancel
Changes to clear your changes .
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents