Table of Contents
Advertisement
Programming with 750 Area Velocity Module Installed, continued...
16. The current level will be displayed. Enter an
adjustment if needed. If the adjustment is different
by more than 0.50 ft, you will be prompted "Are you
sure? Yes No". Choose NO to re-enter; select YES
if correct.
CURRENT LEVEL IS
__.__ ft
ADJUST LEVEL TO
__.__ ft
17. Enter the amount of zero level offset. Refer to the
750 Area Velocity manual for more information on
zero level offsets.
ZERO LEVEL OFFSET:
_.___ ft
4.8 Other Functions
18. If you are using a standard-size sensor, select the
maximum depth for the velocity measurement. This
screen does not appear if using a low-profile
sensor which is automatically set to 1 inch.
19. From this point forward, the screens will be the
same as steps 15 through 26 in the example
"Programming with 730 Bubbler Flow Module
Installed."
In Standard Programming, the "Other Functions" menu screen
includes options for:
• Maintenance (see Section 9).
• Manual Functions (see Section 6.6).
• Programming Style (see Section 3.3).
You can access these options by selecting OTHER FUNCTIONS
from the Main Menu.
BLZZRD Portable Refrigerated Sampler
Section 4 Standard Programming
MAXIMUM DEPTH FOR
VELOCITY MEASUREMENT
2"
3"
4"
NUMBER OF BOTTLES:
1
4
14
RUN
PROGRAM
VIEW REPORT
OTHER FUNCTIONS
MAINTENANCE
MANUAL FUNCTIONS
PROGRAMMING STYLE
4-15
Advertisement
Table of Contents
