Replacing A Printer (Lan Connection) - Epson TM-m30 User Manual

4
Click the [+] button in the "Printers & Scanners" screen.
5
The "Add" screen appears. Select the new "Printer B" and change the [Name] to
"Printer A". Select the same [Use] setting as "Printer A" and click the [Add] button.
By typing "command + V" in the [Name] field, the original printer name will be restored.
If new "Printer B" has been already added, change the printer name by "Settings" function of the
"Printer B" queue screen.
This completes the printer replacement procedure. When printing is performed with "Printer A" selected, the
print job is output to "Printer B".

Replacing a Printer (LAN Connection)

1
Set the IP address of "Printer B" to the same address as "Printer A".
For details on setting the IP address, see
2
Disconnect "Printer A" from the network and connect "Printer B" to the network.
This completes the procedure for replacing a printer. When printing is performed with "Printer A" selected, the
print job is output to "Printer B".
"Printer Network Settings" on page
Chapter 2 Installation
19.
24
2