Table of Contents
Advertisement
・OPOS_EPTR_LABEL_JAM
・OPOS_EPTR_MECHANICAL
・OPOS_EPTR_CUTTER
・OPOS_EPTR_UNRECOVERABLE
・OPOS_EPTR_AUTORECOVERABLE
*2
This error is not returned when using the TM-U950.
6.1.3 Error Event
The ResultCode and ResultCodeExtended codes when an error event occurs are
as follows.
Error events to be fired regardless of settings in "Device Specific Setting".
ResultCode
OPOS_E_FAILURE
*1
Unsupported by the TM-U950.
Error events to be fired when "Issue an Error Event for every error
occurrence during Check insertion." radio button of "Error handling options
during Check insertion setting." in "Device Specific Setting" dialog box is
marked.
ResultCode
OPOS_E_EXTENDED
OPOS_E_ILLEGAL
OPOS_E_OFFLINE
OPOS_E_NOHARDWARE
*1
Unsupported by the TM-U950.
ResultCodeExtended
OPOS_EMICR_COMPORT
OPOS_EMICR_DATAEND
ResultCodeExtended
OPOS_EMICR_BADDATA
OPOS_EMICR_NODATA
OPOS_EMICR_BADSIZE
*1
OPOS_EMICR_JAM
OPOS_EMICR_CHECKDIGIT
OPOS_EMICR_COVEROPEN
OPOS_EMICR_NOCHECK
OPOS_EX_TIMEOUT
0
0
22
APPLICATION DEVELOPMENT GUIDE
MICR (EPSON TM Series)
Version 3.00 Feb. 2019
COM port error.
*1
Finish of Data Events corresponding to valid data.
*1
The read data contained not analyzable data.
*1
The read data is not check data, or there is no
data read.
*1
Too many digits were detected in the check data.
Paper is jammed during reading.
Check of check digits failed.
Its cover is opened during reading operation.
A check is not present in the device.
Output result is not returned within timeout period.
Refer to UPOS Specifications.
Power is OFF or unconnected.
Meaning
Meaning
Advertisement
Table of Contents
