Table of Contents
Advertisement
2) Setting of USB interface devices
When the SetupPOS utility is used to select the device when using an USB port,
select devices with "U" appended to the end of the device name.
Example: TM-H6000IIIU
3) Setting of Ethernet interface devices
When the SetupPOS utility is used to select the device when using an Ethernet
port, select devices with "E" appended to the end of the device name.
Example: TM-H6000IIIE
4) Setting of Bluetooth interface devices
When using a printer with Bluetooth I/F specifications,
Select the COM port of the Bluetooth device in the Create New window of
TMPORT.
Notes: Bluetooth interface only support TM-H6000V.
5) Device Specific Settings
MICR's specific setting should be done after specifying the Device to use in
"Device Specific Settings" dialog box of SetupPOS Utility. The following items
are able to set in the dialog box.
Error handling options during Check insertion
Check Font
Regarding how to set with "Device Specific Settings", please refer to
"EPSON OPOS ADK MANUAL User's Manual (Installer/ SetupPOS/
TMUSB)".
"Error handling options during Check insertion setting."
Sets how you want to be notified if an error is fired during Check insertion.
•
"Issue an Error Event for every error occurrence during Check insertion.
(applicable for UPOS 1.7 and subsequent releases)" radio button
(here after, referred without (applicable for UPOS 1.7 and subsequent
releases))
Under the setting that this button is marked, EndInsertion method is
considered to be succeed when check insertion by execution of
EndInsertion method is done normally, regardless of whether the read
data is illegal.
The conditions of the read data and reading operation of MICR are
APPLICATION DEVELOPMENT GUIDE
4
MICR (EPSON TM Series)
Version 3.00 Feb. 2019
Advertisement
Table of Contents
