Device Settings; Usable Device Specific Settings; Multilingual Font Setting - Epson TM-T82XM Development Manual

2.4 Device Settings

The following explanation is about the settings for the
TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83III models.

2.4.1 Usable Device Specific Settings

For the TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM models, the following
device specific settings are settable by the SetupPOS utility. For the detail, please
refer to the corresponding part of the Section 2 of "EPSON OPOS ADK MANUAL
APPLICATION DEVELOPMENT GUIDE POSPrinter (TM Series)"
Tab
General
Paper
Bitmap
Color Bitmap
Status Log
Default Value
Printing Properties Receipt Characters per Line
*1
The settings can be changed when using a connection other than serial.

2.4.2 Multilingual font Setting

The TM-T82XM/TM-T81IIIM/TM-T83IIIM supports the following font type.
• CHINA GB18030
• TAIWAN BIG-5 (TM-T82XM only)
• VIETNAMESE
• THAI 3 PASS
• THAI 1 PASS
The default font type is set to CHINA GB18030.
POSPrinter (TM-T82XM/TM-T81IIIM/TM-T82IIIL/TM-T83IIIM)
Disable panel buttons
Assume print complete when data output finishes
Homogenize Error Codes
Ignore firmware version check
Output complete timeout [s]
Paper Type
Paper Width [mm]: LineWidth [dot]: LineCharsList
TMFlogo...
NVRAM
Halftone: Method
Halftone: Brightness
Color: Primary
ERROR
OFFLINE
Log file name (full path name)
Maximum file size [KB]
Multilingual font
Receipt Line Spacing [dots]
CharacterSet [CodePage Number]
3
APPLICATION DEVELOPMENT GUIDE
Version 3.00 Apr. 2021
Settings
*1