Using Your Ss15; Using Without Connecting To Host; Using When Connected To Host; Connecting The Hub To A Host Computer - CAMBRIONIX SS15 User Manual

In this section you can find information information on how to use your hub in a charge only or
a charge and sync application. You can also find information on managing your hub and
. changing port modes, connecting multiple hubs to one host and using Cambrionix Software
When the Hub is switched on and is not connected to a local host computer it is
automatically configured to charge devices using its intelligent charging algorithm. Simply
connect the devices to be charged to any of the available ports (not the Host Port) using
Once the devices are connected, the algorithm will detect the highest charge rate allowable for
specified by the manufacturer
will commence once profiling is complete. Depending on the state of charge of the device
A cable. Using an incorrect
. host cable may result in the hub and all subsequent ports not being recognised by your host
When the Host Port is connected to a local computer, the hub defaults to Sync mode and
charge currents are determined according to USB Implementers Forum (USBIF) Super-Speed
USB3 specifications. If the attached device complies with USB-IF Battery Charging
specification BC1.2 and supports Charging Downstream Port (CDP), the hub can provide
If the connected device does not comply with BC1.2, the
. in compliance with USB specifications
34 ‫ﻣﻦ‬ 10 ‫ﺻﻔﺤﺔ‬

Using without connecting to host

‫( أ‬ each attached device. Charging at the optimum rate (up to 2.1

Using when connected to host

Connecting the Hub to a host computer

‫اﻟﻨﻮع‬ ‫ﻣﻦ‬ USB 3.2 ‫ﻣﻨﻔﺬ‬ Connect the SS15 to your host system using a
‫أﻣﺒﻴﺮ‬

Using your SS15

. USB - compliant cables
. attached, this may take tens of seconds

Charging

‫. أ‬ high-speed charging at up to 2.1
‫ﻣﻠﻠﻲ‬ charge current will be limited to 500
5 .
. 5.1
. 5.2
5.2.1
5.2.2
SS15