Power-On Self Test (Post) Sequence - Lexmark 4098-001 Service Manual

4098-001

Power-On Self Test (POST) Sequence

Turn the printer on and check for a correct POST operation by
observing the following:
1. The power light come on.
2. The carrier moves to the left to wipe the printheads.
3. The carrier moves to the right over the maintenance station and
seals the printheads.
4. The paper feed gears turn.
5. All motors stop and the power light stays on.
If your printer completes POST with no errors, go to the
Tables" on page
action.
If your printer does not complete POST, locate the symptom in the
"POST Symptom Table" on page 2-5
action.
2-4
Service Manual
2-6, locate the symptom and take the indicated
and take the indicated
"Symptom