Speaker Configuration - Lexicon DC-2 Owner's Manual

Lexicon dc-2 digital controller owner's manual
Table of Contents

Advertisement

DC-2 Digital Controller
This menu item assigns the status for the programmable (PGM) trigger on
the DC-2 rear panel. +12VDC is provided for controlling ancillary equip-
ment or functions. Selections are ENABLE or DISABLE for the selected
input. The factory default is ENABLE (high) for A/V inputs and DISABLE
(low) for audio only inputs. (+5VDC is available via internal jumper.
Contact your dealer or Lexicon Customer Service to perform this change.)
The Speaker Configuration menu allows a wide range of choices in speaker
type and room setups to provide optimal performance in almost any room.
An adjustable lowpass filter is available for the subwoofer, as well as a
highpass filter for all other speakers. The three selections are for CUSTOM,
THX or SURROUND EX configuration.
SETUP MENU
INPUT CONFIG
SPEAKER CONFIG
OUTPUT LEVELS
LISTENER POSITION
LOCK SETTINGS
Press SELECT to open the CUSTOM CONFIG menu. Press SELECT to
access the selections for any highlighted menu item.
CUSTOM CONFIG MENU
FRONT L/R
CENTER
SIDES
REARS
SUBWFR
Select LARGE for full-range front speakers to deliver full frequency re-
sponse to the front left and right outputs. Selecting SMALL activates a 12dB
per octave highpass filter and automatically routes low frequency informa-
tion to the subwoofer output. Choices of 40, 80 and 120 Hz are available for
the -3dB point. The SMALL setting is recommended unless your speakers
are capable of handling full audio signals, or are equipped with their own
crossovers.
SPEAKER SETUP MENU
CUSTOM CONFIG
THX CONFIG
SURROUND EX CONFIG
Adjust with
SMALL
LARGE, SMALL
SMALL
LARGE, SMALL, NONE
DIPOLE SMALL
LG or SM STD, LG or SM DIPOLE, NONE
SMALL
LARGE, SMALL, NONE
YES
YES, NO
PGM Trigger Assignment
PGM GND PWR
Speaker
Configuration
Custom Configuration
or
Front L/R
-1.000
-2.000
-3.000
-4.000
-5.000
-6.000
-7.000
-8.000
-9.000
-10.00
-11.00
-12.00
-13.00
-14.00
-15.00
-16.00
-17.00
-18.00
The high pass filter attenuates low fre-
quencies at 12dB per octave. The values
given are for the -3dB point.
System
Configuration
TRIGGERS
TRIGGERS
IR IN
PWR
PGM
dBr
0.0
10
20
50
100
200
500
1k
2k
Hz
GND
5k
10k
23

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents