Battery Power Status Indicator; Measuring Distance With The Rx-600 / 750 - Leupold RX-600 Series Operation Manual

To determine your battery's power level, look for the following indicators:
FULL – A full battery bar indicates your battery is at or near peak capacity .
HALF – A half-full bar indicates your battery has reached half-capacity .
LOW – If the battery bar is empty, yet there is still data displayed above the bar, the
battery is nearing the end of its life and should be replaced .
NO POWER – If the battery bar is empty, and there is no data displayed above the
bar, your battery is dead and you must replace it . The battery status bar will flash
and the unit will shut down when no power remains .

MeaSurInG dIStance wItH tHe rX-600 / 750

Measurement of distance with the RX-600 / 750 is a very simple operation:
1 . View the object of interest through the monocular .
2 . Depress the POWER button to power up the unit .
3 . Align the reticle over the object being viewed .
4 . Depress the POWER button again – this will cause the laser to activate .
5 . Read the distance as shown in the image field .

Battery Power StatuS IndIcator

5