Lenovo IDEAPAD S10-3S Hardware Maintenance Manual page 63

Lenovo IdeaPad S10-3s
Figure 17. Removal steps of antenna assembly and LCD cover (continued)
Peel off the adhesive tapes securing the antenna boards, release the
cables from the cable guide, and then remove the antenna assembly in the
direction shown by arrows .
3
3
3
When installing: Route the antenna cables along the cable guides and secure
the antenna boards with adhesive tapes. As you route the cables, make sure
that they are not subjected to any tension. Tension could cause the cables to
be damaged by the cable guides, or a wire to be broken.
59