Garmin G3X TOUCH Single 7 Manual page 45

4. G3X Touch CDI source ...................................................... Touch the HSI display on the PFD.
5. Select the external navigator from the CDI Source window (GPS 1 or 2).
6. Press and Hold BACK Button to return to normal PFD display.
If Flying Vectors-To-Final:
7. Activate Vectors-to-Final on the external navigator, Verify CDI changes slews to the localizer
front course.
8. Navigation Source .......................................................... Select LOC on the external navigator.
9. G3X Touch CDI source ...................................................... Touch the HSI display on the PFD.
10. Select the external navigator from the CDI Source window (LOC 1 or 2).
11. Verify the selected front course .......... Touch the Selected Course window to adjust if needed.
12. Establish Intercept Heading.
13. Verify ACTIVE and ARMED modes on the AFCS Status Box on the PFD, if using the GFC
500 autopilot/FD.
14. Upon reaching the BC course, turn inbound and follow the BC course guidance.
15. Set Minimum Descent Altitude (MDA) ............................ Touch the Reference Altitude display.
16. At the Final Approach Fix (FAF), begin descent to an intermediate altitude or the Minimum
Descent Altitude.
17. At the Minimum Descent Altitude, Set Missed Approach Altitude ........... Touch the Reference
18. At Missed Approach Point, Continue visually for a normal landing,
OR
Press GO AROUND button and fly the missed approach procedure.
If Flying Full Approach Including Transition:
ACTIVATE THE APPROACH on the External navigator,
OR
ACTIVATE a DIRECT TO the IAF on the External navigator.
7. Navigation Source ........................................................... Select GPS on the external navigator
8. Select IAF waypoint and execute the Direct-TO on the external navigator
190-01754-01 Rev. 5
FAA Approved
• On the PFD, Touch the HSI.
• Touch the Highlight Minimums window.
• Enter Barometric Altitude Minimums and touch ENTER
Enter the Minimum Descent Altitude.
Enter the Missed Approach Altitude.
AFMS or Supplemental AFM for the Garmin G3X Touch EFIS
PFD Options window opens.
PFD Options window opens.
Altitude display.
P a g e | 4-13