Garmin G3X TOUCH Single 7 Manual page 38

If Flying Vectors-To-Final:
7. Activate Vectors-to-Final on the external navigator, Verify CDI changes to LOC and slews to
the inbound course,
OR
If using a VHF navigation receiver, set the CDI to the desired course ............... Touch the
•
• Enter the desired LOC course, press ENTER.
8. Establish Intercept Heading.
9. Verify ACTIVE and ARMED modes on the AFCS Status Box on the PFD, if using the GFC 500
autopilot/FD.
10. Upon reaching the LOC course, turn inbound and follow the LOC course.
11. Set Minimum Descent Altitude (MDA) ............................ Touch the Reference Altitude display.
12. At the Final Approach Fix (FAF), begin descent to an intermediate altitude or the Minimum
Descent Altitude.
13. At the Minimum Descent Altitude, Set Missed Approach Altitude ........... Touch the Reference
14. At Missed Approach Point, Continue visually for a normal landing,
OR
Press GO AROUND button and fly the missed approach procedure.
If Flying Full Approach Including Transition:
ACTIVATE THE APPROACH on the External navigator,
OR
ACTIVATE a DIRECT TO the IAF on the External navigator.
7. Navigation Source ........................................................... Select GPS on the external navigator
8. Select IAF waypoint and execute the Direct-TO on the external navigator
9. G3X Touch CDI source ....................................................... Touch the HSI display on the PFD.
10. Select the external navigator from the CDI Source window (GPS 1 or 2).
11. Press and Hold BACK Button to return to normal PFD display.
12. Verify ACTIVE and ARMED modes on the AFCS Status Box on the PFD, if using the GFC 500
autopilot/FD.
AFMS or Supplemental AFM for the Garmin G3X Touch EFIS
P a g e | 4-6
Selected Course window on the PFD.
Enter the Minimum Descent Altitude.
Altitude display.
Enter the Missed Approach Altitude.
PFD Options window opens.
190-01754-01 Rev. 5
FAA Approved