Table of Contents
Advertisement
8
Local Console Manager LCM8 and LCM16 Installation and User's Guide
Safety precautions
DANGER
Electrical current from power, telephone, and communication cables is hazardous.
To avoid a shock hazard:
•
Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this
product during an electrical storm.
•
Connect all power cords to a properly wired and grounded electrical outlet.
•
Connect to properly wired outlets any equipment that will be attached to this product.
•
When possible, use one hand only to connect or disconnect signal cables.
•
Never turn on any equipment when there is evidence of fire, water, or structural damage.
•
Disconnect the attached power cords, telecommunications systems, networks, and modems before you
open the device covers, unless instructed otherwise in the installation and configuration procedures.
•
Connect and disconnect cables as described in the following instructions when installing or moving this
product or attached devices.
To Connect:
1.
Turn everything OFF.
2.
First, attach all cables to devices.
3.
Attach signal cables to connectors.
4.
Attach power cords to outlet.
5.
Turn device ON.
To Disconnect:
1.
Turn everything OFF.
2.
First, remove power cords from outlet.
3.
Remove signal cables from connectors.
4.
Remove all cables from devices.
Hazardous voltage, current, and energy levels are present inside any component that has the above label
attached. There are no serviceable parts inside these components. If you suspect a problem with one of these
parts, contact a service technician.
Rack-mounting safety instructions
When rack-mounting a console switch, consider these factors:
Advertisement
Table of Contents
