Lithium Battery; Replacement Procedure - Panasonic AG-HMC150P/AN Service Information

3. Lithium battery

3-1. Replacement Procedure

1. Remove the Side Case R S Ass'y.
2. There is a Lithium battery on the RSIDE P.C.Board.
RSIDE P.C.Board
3. Unsolder the each soldering point of electric lead terminal for Lithium battery "Ref No: B1400 at foil side of
RSIDE P.C.BOARD) and remove the Lithium battery together with electric lead terminal.
4. Install the new battery.
< NOTE >
Do not pick up the lithium battery and electric lead terminal
with tweezers.
When you use tweezers, use the things of non-conductivity.
5. Set the date and time of internal clock (Refer to item "Setting the Calendar" of operation instructions for the
setting method).
NOTE: A setup date and time of internal clock can be set also on PC EVR software (refer to item "5-4-1.
Setting and confirmation of Date and Time of internal clock(SYSCON(S) section)" and item
"6-3-3. Setup of Date and Time of internal clock").
SIDE CASE R S Ass'y
Do not put soldering iron to simultaneous (+) and (-) terminal.
INF-4
LITHIUM BATTERY
It fixes with adhesives.
Do not touch the (+) and
(-) electric lead terminal.