Rear Unit - Kyocera FS-6950DN Operation Manual

Rear Unit

OPERATION GUIDE
3 Remove the paper from the
printer.
If the jammed paper appears to be
pinched by rollers, pull it along the
normal running direction of the
paper.
NOTE:
If you cannot find a paper jam, try checking inside the rear of the
printer. Refer to Rear Unit on page 4-15.
4 Insert the developer unit together
with the toner container, back into
the machine.
5
Close the top cover and MP tray. The printer warms up and resumes
printing
1 If paper is not completely ejected
into the output tray, open the rear
unit.
2
Open the fuser cover and remove
the jammed paper by pulling it out.
NOTE:
If you cannot find a
paper jam, try checking inside
the rear of the printer.
CAUTION:
The fuser unit inside the printer is hot. Do not touch it with your
hands as it may result in burn injury.
Troubleshooting
4-15