Maintenance - Hach DR1300 FL User Manual

9.2 Show and save the measurements on a PC
Show and save the measurements on a PC with the desktop app and
Bluetooth/USB adapter.
Note: The instrument must have the Bluetooth option to use the desktop app.
1. Download the desktop app to the PC as follows:
a. Go to http://www.hach.com.
b. Enter "DR1300 FL" in the Search box.
c. Select the "Downloads" option on the left side in the "Search
Type" box.
d. Scroll down to "Software".
e. Click the "DR1300 FL Data Management Tool" link.
2. Install and start the desktop app.
3. Install the supplied Bluetooth/USB adapter
4. On the instrument, select SYSTEM > BTLE to set Bluetooth to on.
Note: Bluetooth is set to off when Exit is selected or the instrument is set to
off.
5. On the desktop app, select Device > Connect via USB-Bluetooth
at the top of the window. A new window opens.
6. Select DR1300 FL, then click Connect to Device.
7. Select Datalog > Read Datalog List. A list of dates shows on the
display.
8. Select the log. Then, select Read Datalog to show the datalog.
9. Select Export as CSV File to save the datalog to the PC.
Section 10 Maintenance
10.1 Replace the batteries
Explosion hazard. Incorrect battery installation can cause the
release of explosive gases. Be sure that the battery is of the
approved chemical type and is inserted in the correct orientation.
5
Only supplied with instruments with the Bluetooth option.
20 English
W A R N I N G
5
in the PC.