Installation - Panasonic DBS 40 Installation Manual

Chapter 5. Peripheral Equipment

Installation

5-4
Technical Manuals Online! - http://www.tech-man.com
1. Connect one end of the RS-232C cable to CN6 on the Connector Panel.
Figure 5-l shows cable pinouts for 25pin and g-pin RS-232C devices.
These connections have been used successfully with many PCs and
SMDR devices; however, consult the documentation of the PC or SMDR
device before fabricating a cable.
2. Connect the other end of the RS-232C cable to the local programming
terminal or SMDR device.
Main Cabinet (CN6) RS-232C 1
Signal
Pin No. and Connection
Name
DTR
25
14
Prog. Term. or SMDR Printer RS-232C
6
DBS Manual - Issued W/95
Section 300~Installation
Programming Terminal
6 DSR
DBS-70-300