Chapter 5. Peripheral Equipment
Sing le Line T e le pho ne Ada pto r
Guidelines
Figure S- 20. Cable punck- ou d&e. SLTA
5- 34
Technical Manuals Online! - http://www.tech-man.com
The Single Line Telephone Adaptor (SLTA. VB-43709) provides an
l
alternative way of connecting analog DTMF telephones (2500 sets). One
SLTA supports up to 4 Single Line Telephones.
. Each SLT extension requires a digital extension port connection to the
SLTA.
1. Remove the cover from the SLTA.
2. Remove the cable punch-out plate (Figure 5-20) to make an opening for
the cables coming into the SLTA.
To remove the plate, cut the grooves on either side with diagonal cutters.
bend the plate back and forth with needle-nose pliers to remove it.
Then
3.
SLTA to the wall (see Figure 5-21).
Mount the
Note: Table 5-l I shows the maximum distance the SLTA can be located
from the DBS.
DBS Manual - Issued 8/l/95
Section 3004nstallatlon
DBS-70-300