5
Controls and Connections
5.2
Back Panel Layout
5.1.3 Cue/Main Select Cue/Main 选择
The Central Station comes equipped with separate Cue and Main signal
paths. The Cue signal path includes the talkback-microphone signal and
sendsthissignaltotherecordingartistviaanexternalheadphoneamp
or thetwoonboard headphone amps.TheMain signalpath is intended
for the control room and does not include the Talkback signal.
Central Station 配备了独立的提示和主信号路径。提示信号路径包括
对讲麦克风信号,并通过外部耳机放大器或两个板载耳机放大器将
此信号发送给录音师。主信号路径是为控制室准备的,不包括对讲
信号。
• Cue Output Level Control. Adjusts the overall output level of the Cue audio path.
• Input Select Buttons. Determing the sources for the Cue or Main Audio Paths
• Digital Input. Selects the S/PDIF orToslinkinput as the
digital source for the Cue and Main audio paths.
• Aux Input Level Control. Adjusts the overall input level of the Aux input.
• Cue Output Level Control。调整提示音频路径的整体输出电平。
• Input Select Buttons。确定提示或主音频路径的来源
-TRS1. 将模拟TRS1输入连接到提示或主音频路径。
-TRS2. 将模拟TRS2输入接入到提示或主音频路径。
-Digital.将当前选择的数字输入(Toslink或S/PDIF)分配到提示或主音频路径。
-Aux. 将辅助输入接入到提示或主音频路径。
Digital
•
•
Aux Input Level
18
•
TRS 1. Patches the analog TRS1 input to the Cue or Main audio path.
•
TRS 2. Patches the analog TRS2 inputs to the Cue or Main audio path.
•
Digital.PatchesthecurrentlyselectedDigitalinput
(ToslinkorS/PDIF) to the CueorMain audio path.
•
Aux. Patches the Aux input to the Cue or Main audio path.
Input。选择S/PDIF或Toslink输入作为提示和主音频路径的数字源。
Control.。调整辅助输入的整体输入电平。
Central Station Plus
FrontPanelLayout 5.1