Basic Operation; Selecting Modes; Selecting - Korg sampler Basic Manual

Basic operation

1. Selecting modes

In order to use a particular function on the TRITON
STUDIO, you must first select the appropriate mode.
Press one of the front panel mode keys ([COMBI] key
– [DISK] key) to enter the corresponding mode.
[COMBI] key:
[PROG] key:
[SEQ] key:
[SAMPLING] key:
[S.PLAY] key:
[GLOBAL] key:
[DISK] key:
2. Selecting pages
Each mode has a large number of parameters, which are
grouped into pages.
These are further subdivided by tabs into up to eight tab
pages.
1 Make sure that the desired mode is selected.
To select a mode, press the appropriate mode key
([COMBI] key – [DISK] key).
Here we will use Program mode as an example for our
explanation. Press the [PROG] key.
2 Press the [MENU] key.
The page jump menu will
appear.
In Disk mode there is only one page, so the page
jump menu will not appear.
16
Combination mode
Program mode
Sequencer mode
Sampling mode
Song Play mode
Global mode
Disk mode
3 In the LCD screen, press the desired page.
You will jump to the selected page, and it will appear
in the display. As an example here, press P1: Edit-Basic.
• As a reminder, the page that was
selected before you pressed the
[MENU] key will have its top right
corner bent over.
• You can also jump to the
corresponding page by pressing a
numeric key [0]–[9]. (P0–P9
correspond to numeric keys [0]–[9].)
• By holding down the [MENU] key
and pressing a numeric key [0]–[9],
you can jump directly to the corresponding page
without displaying the page jump menu.
When you press the [EXIT] key, you will return to P0
from any page.
4 Press one of the tabs located at the bottom of the
page.
As an example here, press the OSC Basic tab which is
the second from the left.
• Some pages have no tabs.
5 To move to a page with a different 'P' number, press
the [MENU] key and continue from step 2 of this
procedure.