Playback Using The Jukebox Function; Saving A Jukebox List - Korg sampler Basic Manual

Korg basic guide music workstation, sampler
Table of Contents

Advertisement

Playback using the Jukebox func-
tion
The TRITON STUDIO provides a Jukebox function that
can be used to playback SMF data.
This function allows you to specify the order in which
files in the same directory will be played.
Any jukebox list you create will be erased when the
power is turned off, and cannot be recovered. If you
wish to keep your jukebox list, refer to the section
"Saving a Jukebox list" (next page), and save it onto
media.
1 Press the [EXIT] key to display the P0: Prog/Mix page.
2 Check the "Jukebox" check box.
3 Select P3: Jukebox.
Drive select
Press the drive select button, and select the drive that
contains the data that you want to play back.
4 Use the scroll bar to display the SMF (filename exten-
sion .MID) that will be played first, and select that
file.
5 Press the Add button.
The filename you specified in step 4 will appear in the
Jukebox list.
6 Select the file that will be played second, and press
the Add button.
Add files to the Jukebox list in the order that they will
be played. A maximum of 100 files (00–99) can be regis-
tered in the Jukebox list.
To delete a file from the Jukebox list, press the Delete
button.
7 Press the [EXIT] key to display P0: Prog/Mix.
8 Press the SEQUENCER [START/STOP] key.
The files will playback in the order in which they were
registered.
9 Press the SEQUENCER [START/STOP] key once
again to stop playback.
Only files in the same directory can be registered in a
jukebox list.
If you perform the following operations while creat-
ing a jukebox list, the jukebox list will be lost.
• Change the directory
• Remove media (such as the floppy disk)
• Change drives
122

Saving a Jukebox list

Saving procedure
1 Use the procedure described above to create a juke-
box list.
2 If you want to save the jukebox list on the internal
hard disk or an external SCSI device, use the P3:
Jukebox drive select button to select the drive on
which you want to save the data.
3 In P3: Jukebox, select the "Save Jukebox List" page
menu command.
4 Use the text edit button to enter a name for the juke-
box list ( p.40, 57).
5 Press the OK button.
The jukebox list will be saved to the media.
Loading procedure
1 In the Jukebox page, select a jukebox list (filename
extension .JKB).
2 Press the "Load Jukebox List" page menu command.
The jukebox list will be loaded into the TRITON STU-
DIO.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Triton studio music workstationTriton studio

Table of Contents