Advertisement
Quick Links
Advertisement
Related Manuals for Thenow HSN-JC5
Summary of Contents for Thenow HSN-JC5
- Page 1 Shanghai Thenow Purification Technology Co.Ltd Wine Cellar Cooling Units Self-contained User Manual Thank you for purchasing this “Thenow”product; Please read this manual carefully before attempting to install, operate or service; Please retain this booklet for future reference. １...
- Page 2 !!! WARNING !!! To avoid the risk of electrical shock, property damage, personal injure or death, please read the following instructions carefully with safety or warning labels. *During transportation or moving, please follow the correct direction on the packing case. After transportation or moved, it needs to be allowed to stand for more than 24 hours before it can be turned on.
-
Page 3: Table Of Contents
Table of Contents Product Introduction..............4 Dimensions & Technical Data..........6 Installation & Debugging............9 Introduction of Controller.............19 Maintenance................23 Troubleshooting................24 Warranty................26 ３... -
Page 4: Product Introduction
Wine Cellar Cooling Units Self-contained (HSN-J15-Z) Thenow wine cellar cooling units self-contained is best suited for home or light commercial proper wine storage. This unit is intended for use in cabinets or smaller wine storage rooms. Designed to lower the temperature at its... - Page 5 Traditional Chinese knot design air grille, better heat dissipation. Working Principle 1.Refrigeration Using cycling vapor compression refrigeration system,when the compressor work, indraft low temperature and pressure refrigerant gas from evaporator, compressed by compressor into high temperature and pressure gas, and then into the condenser to condense into liquid, meantime release heat, after throttling under the function of the thermal expansion valve, entering into the evaporator and absorbed heat,then evaporate into gas, finally back to the compressor through the suction tube and complete a refrigeration cycle ;...
-
Page 6: Dimensions & Technical Data
Dimensions & Technical Data Dimensions HSN-JC5: ６... - Page 7 Dimensions HSN-J15-Z： ７...
- Page 8 Technical Data Model Unit HSN-JC5 HSN-J15-Z Cellar Size (Up to) m³ Power V/HZ 220/50 Cooling Heating（Electrical） 2000 Air Flow(M） m³/h Static Pressure Nosie dB（A） Refrigerant R134a Control PC Full-touch smart control Temperature 10-18℃, ±2℃ ℃ Humidity 50~70%, ±5% ℃ Total Power...
-
Page 9: Installation & Debugging
Installation and Debugging Pre-installation Inspection A. Check the outer packing for breakage. B. Machine model (nameplate), check whether it is consistent with what you ordered. C. The appearance of the whole machine is intact. D. Check the below packing details. HSN-J15-Z Packing Details: Item No. - Page 10 1 pc Inlet flange 301x120x30mm Screw 4pcs ST4.2*9.5 Hoop 1 pc Ø22~Ø28 HSN-JC5 Packing Details : Photo Item No. Item Q’ty Size Refer to the Unit 1 set namplate User Manual Control Panel 1 pc 90*90mm Controller Cable Warning: Our company is not responsible for any accident caused by opening the panel and electric control cabinet without the permission of the company.
- Page 11 3-slot receptacle that will plug into the appliance. The marked rating of the extension cord shall be 220V 15A. (1) HSN-JC5 Installation Wine Cabinet & Wine Room JC5 Installation I: Wine Cabinet with Small Space, Internal Fan with Low Speed...
- Page 12 JC5 Installation II: Wine Cabinet with Large Space, Internal Fan with High Speed １２...
- Page 13 JC5 Installation III: Wine Room １３...
- Page 14 (2) HSN-J15-Z Wine Cabinet & Wine Room Installation J15-Z Installation I: Wine Cabinet with Small Space, Internal Fan with Low Speed １４...
- Page 15 J15-Z Installation II: Wine Cabinet with Large Space, Internal Fan with High Speed １５...
- Page 16 J15-Z Installation III: Wine Room Installation １６...
- Page 17 Wine Cabinet Installation Conditions 1. Place the wine cabinet in a properly ventilation location. Otherwise, heat exhausted by the cooling unit will build up and it will not operate properly. 2. Equipment should install on horizontal ground or platform, tilt angle must not exceed one degrees, platform or ground should be able to load-bearing unit weight;...
- Page 18 Online Debugging Note: Always operate this machine from a 220V 1 phase or 3-phase 380V, 50Hz power source, and the fluctuation amplitude does not exceed 10%, the junction box capacity meets the equipment electrical using requirements; Take reference to the internal electrical schematic diagram of the unit, connect the indoor unit and outdoor unit, and ensure that the unit is effectively grounded.
-
Page 19: Introduction Of Controller
Introduction of Controller Controller Introduction: CK-4C-86 series controller is a new type of controller to realize intelligent control of constant temperature and humidity for a wine cellar and wine cabinet cooling units,which is widely used in precise temperature control places with small volume. The controller adopts 4-inch large -screen colorful display technology,timing control,automatic/manual control of air flow speed , automatic operation of the appropriate air flow speed , comfortable energy saving , accurate and reliable. - Page 20 Technical Specifications PCB：AC220V±10% 50/60HZ Power Supply Display：DC12V Shall Material Flame retardant ABS+PC Power <12W Pich of Installation 60mm PCB：123mm×85mm Size Display：91mm×90mm Storage Environment -10~~70℃ 5%~~95%RH Working Condition -10~~70℃ 5%~~95%RH 1. Remove the plastic frame and screw from the packaging box,and then install and fix the plastic frame to the 86 mounting box inside the wall after the wire is threaded out of the plastic frame.
- Page 21 Functions: 1.Power ON/OFF 2.Set (humidity/temperature/time etc.) 3.Setting temperature 4.Setting humidity 5.Running mode display (Constant Temperature/Constant Humidity/Auto/Ventilation) 6.Coil temperature 7.Running Mode Setting 8.Fan running mode(Manual/Auto) 9.Fan air flow setting(Only when fan running mode at “Manual”) 10.Cellar temperature 11.Cellar humidity ２１...
- Page 22 Touch the switch icon in the lower Turn system ON/OFF left corner to turn on or off the unit Color red is on and green is off 1. Touch icon ‘Set' Set temperature 2. Find 'Temperature' , click to enter and set temperature 1.
-
Page 23: Maintenance
Maintenance 1、Using Requirements (1) Working conditions: Surrounding temperature at 5℃-35℃, relative humidity lower than 80% ; (2) Please make certain power supply is specified voltage, it’s strictly prohibited to operate equipment with phase missing or under voltage； (3) If the equipment has not been used for a long time ,please make sure to turn off the power. 2、Cleaning and Replacing Disconnect electric power from the appliance before any operation, otherwise there will be the risk of electric shock. -
Page 24: Troubleshooting
Troubleshooting WARNING Disconnect electric power from the appliance before performing any maintenance or repairs,failure to do so could result in death or electrical shock. If maintenance is needed, wait for 3 minutes after power failure (let capacitor discharge on PCB), and then open the maintenance door. - Page 25 1. Setting too high. 1. Lower setting. 2. Improper cabinet seals. 2. Check gasket and door opening. Temperature 3. Ambient temperature too high. 3. Check installation location. high 4. Cabinet/room too large. 4. Check for excessive size or the machine 5.
-
Page 26: Warranty
Other preferential terms Our company provides free technical advisory services to users. Shanghai Thenow Purification Technology Co.,Ltd Factory Add: No. 59 Linsheng Road, Tinglin Town, Jinshan District, Shanghai, China www.thenowair.com Email: sales@thenowair.com...