Using The Operating Menu; The Buttons; Overview Of The Operating Menu - Sennheiser SR 300 IEM Manual

Using the operating menu

The buttons

Button Function of the button
Press the STANDBY • Switches the transmitter on and off
button
• Cancels the entry and returns to the current standard display
(ESC function)
• Activates/deactivates the RF signal
(special function, see page 16)
Press the jog dial • Changes from the current standard display to the operating
menu
• Calls up a menu item
• Enters a submenu
• Stores the settings and returns to the operating menu
Turn the jog dial • Changes to the next/previous menu item
• Changes the setting of a menu item

Overview of the operating menu

For more detailed information on the operating menu, refer to the instruction
manual of the SR 300 IEM. This instruction manual can be downloaded from
the SR 300 IEM product page at www.sennheiser.com.
Hauptmenü
„Menu"
Erweitertes Menü
Sensitivity
„Advanced Menu"
Mode
Frequency Preset
Name
Tune
Equalizer
Sync Settings
AutoLock
RF Power
Advanced
Warnings
Exit
LCD Contrast
Reset
IP-Address
Software Revision
Exit
When the standard display is shown on the display panel, you can get into the main menu by
pressing the jog dial. The extended menu
accessed via the corresponding menu items.
Using the operating menu
„Sync Settings"
Balance
Squelch
Mode
High Boost
Auto Lock
Limiter
Exit
„Warnings"
AF Peak
RF Mute
Exit
"Advanced Menu" and the other menus can be
17