Related Manuals for Neilsen CT0902
Summary of Contents for Neilsen CT0902
- Page 1 ADJUSTABLE HEIGHT ROLLER WORK STAND 680 - 1100MM CT0902 ORIGINAL INSTRUCTIONS Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.
- Page 2 SPECIFICATIONS Adjustable Height: 680-1100mm Roller Size: 290mm (L) X 48mm(Dia.) Weight Capacity: 60Kg IMPORTANT SAFETY INFORMATION WARNING! READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS AND WARNINGS BEFORE OPERATING THIS TOOL. FAILURE TO DO SO MAY RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE AND WILL VOID WARRANTY.
- Page 3 IMPORTANT SAFETY INFORMATION WARNING - The use of any accessory or attachment other than one recommended in this instruction manual may present a risk of personal injury. WARNING: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. It must be under- stood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator.
- Page 4 ASSEMBLY INSTRUCTIONS CONT. Step 3. Put the roller assembly (1) on the stand assembly and connect them with two hex bolts and washers (5). Use the hex key to tighten the hex bolts as show in Fig 4. Step 4. NOTE: You can adjust the height of the stand Fig.