Related Manuals for Neilsen CT4951
Summary of Contents for Neilsen CT4951
- Page 1 HYDRAULIC PIPE BENDER SET FOR COPPER PIPE CT4951 Instruction Manual Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL...
-
Page 2: Important Safety Information
SAVE THIS MANUAL Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the month and year of purchase. Keep this manual and the receipt in a safe and dry place for future reference. - Page 3 PART LIST DESCRIPTION DESCRIPTION former 1set oil reservoir die holder 1set seal cap O-ring 25.8x 1.8 hex screw M5X 10 busing screw M5x 5 O-ring 12.2x 2.4 steel- ball C4 body oil suction pipe screw valve spring spring base valve cover spring 0.7x piston spring...
-
Page 4: General Safety Rules
GENERAL SAFETY RULES TO WORK IN SAFE CONDITIONS WITH THIS TOOLING, IT IS IMPERATIVE TO READ CAREFULLY THE DIRECTIONS FOR USE AND TO FOLLOW THE INSTRUCTIONS IT CONTAINS. IF YOU DO NOT RESPECT THE INFORMATION WRITTEN IN THAT INSTRUCTION MANUAL THE WARRANTY WILL BE CANCELLED. 1. - Page 5 g. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the hydraulic crimping tool. This tool is dangerous in the hands of untrained users. h. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the Hydraulic Pipe Bender operation.
-
Page 7: Specific Safety Rules
SPECIFIC SAFETY RULES 1. Maintain labels and nameplates on the tool which carry important safety information. If unreadable or missing, contact the agent to replace. 2. This product is not a toy, keep it out of reach of children. 3. Do not slide your fingers between the former and shaft during operate the tool. 4. -
Page 8: Specification
This Hydraulic Pipe Bender is a tool for bending copper tube, aluminum tube, PVC pipe and thin-wall steel tube with elegant design, lightly and ingeniously structured, easy for application, safe in handling to bend 90 1. Specification CT No. CT4951 Max. bending range: 1.5mm thickness Ф22 soft copper tube Length: Approx.310mm Oil capacity 100ml Weight: 2.6kgs... -
Page 9: Troubleshooting
The dusty and air will cause the tool does not working or the sealing kits lose their function. Keep the oil clean during changing the oil and avoid the dusty into the hydraulic system. Waiting for a little to exhaust the air which in the oil reservoirs, then insert the oil plug. Please turn off the turn screw to avoid the air into the hydraulic system. -
Page 10: Maintenance And Servicing
MAINTENANCE AND SERVICING Damaged equipment can fail, causing serious personal injury. Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use. BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, and any other condition that may affect its safe operation. -
Page 11: Description Of The Components
2． Description of the components Series No. Description Function Shaft Assist to bending Former Assist to bending/ retract piston Turn screw Release pressure Pump body For store oil Pump handle For operating Cover For fixing the oil reservoir... - Page 12 OPERATING INSTRUCTIONS Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Any parts of the tool cannot be knocked; the tool is dangerous when the parts is broken. Select the appropriate shaft and former for intended using.
- Page 13 Do not bending the hardness material, otherwise it will damage the tool and caused serious personal injury. Please refer the illustration below for this item...