Related Manuals for Neilsen CT0949
Summary of Contents for Neilsen CT0949
- Page 1 MORTAR MIXER MACHINE CT0949 CT0950 ORIGINAL INSTRUCTIONS SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.
-
Page 2: Ec Declaration Of Conformity
Declare that the design and construction of the following machine, in the form supplied by us, comply with the requirements of the appropriate EC directives. Product description: MORTAR MIXER MACHINE Model: CT0949 CT0950 ●EC-Machinery Directive 2006/42/EC ●EC Directive of Electromagnetic Compatibility ：2014/30/EU... - Page 3 General Power Tool Safety Warnings WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may resuit in electric shock,fire and/or serious injury. Save all warnings and instructions for future reference. 1)Work area safety a) Keep work area clean and well lit.Cluttered or dark areas invile accidents.
- Page 4 3) Personal safety a) Stay alert, watch what you are doing and use common sense when operatng a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention whife operating power tools may result in serious personal injury.
-
Page 5: Main Components
e) Maintain power tools . Check for misalignment or binding of moving parts. breakage of parts and other condition that may affect the power tool’s operation. If damaged , have the power tool repaired before use . Many accidents are caused by poorly maintained power tools. f) Keep cutting tools sharp and clean . -
Page 6: Production Description
TECHNICAL DATA ITEM NO CT0949 CT0950 Rated Voltage 110V~ 220-240V~ Rated Fer 60Hz 50Hz Rated Power 1200W 0-500/min Rated no-load speed 0-700/min Mixing diameter 120mm 2.PRODUCTION DESCRIPTION The mixer is a electrical power mixer, which fitted with double count-rotating mixing tool (single mixing tools also available). It is used for mixing building... - Page 7 DO check the machine have earth protecting or not! The machine CANNOT be over loading! The electrical cable CANNOT be too far away the machine, CANNOT pull the cable to disconnect the plug from the socket directly! Keep the cable from heating, damp, scratch! (10) DO only use no scratch, no defected cable with plug! (11)
-
Page 8: Maintenance
5. MAINTENANCE Correct maintenance for the machine can prolong the working life. The handle switch must always keep in proper function and good maintenance. The mixing tools should be cleaned when the poeration is finish or no use for long time. Normally the fllowing water or quaz sand can clean the mixing tools well. -
Page 9: Operation
6. OPERATION SINGLE MIXING (Picture 1): Take out the two parts of the mixing tools from the carton. (picture 2): Fitting the two parts. (picture 3): Use the wrench until it is tightened. (picture 4): Put the mixing tools to the outlet shaft. (Picture 5): Ture the screw of the mixing tools to the direction of the old position, and the mixing tools is tightened. - Page 10 (Picture 6) (Picture 7) （3）STOP MACHINE (Picture 8) Loose the start switch so the machine will be stopped. Picture 8 Electrical products must not be thrown out with domestic waste.Recycle them at the special disposal centres provided for the purpose.Contact your local authoriities or stockiest for advice on recycling.
- Page 11 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...