Names And Functions Of Parts; Main Unit - Kenwood VR-9060 Instruction Manual

Names and functions of parts

Main unit

Speaker
indicators
*
Input channel indicators
Input channel indicators light
up according to the
incoming audio signals.
"S" indicator will light up
when the surround compo-
nent of the audio signals is
*
Input channel indicators
only 1 channel.
Output channel indicators
The figure is the view when the front cover is open
A SPEAKERS B
PHONES
1
(POWER ON/STANDBY) key
Use to turn the power ON/STANDBY.
Standby indicator
2 SPEAKERS A/B keys
Use to turn the A/B speakers on or off.
3 Surround LED (lighting-emitting diode)
indicators
DSP indicator
Lights when the receiver is in the DSP mode.
96kHz fs indicator
Lights when the receiver is in the 96kHz
LPCM playback mode.
ACTIVE EQ indicator
Lights when the receiver is in the ACTIVE EQ
mode.
DOLBY DIGITAL indicator
Lights when the receiver is in the Dolby
Digital mode.
DTS indicator
Lights when the receiver is in the DTS mode.
LOUDNESS indicator
Lights when the LOUDNESS is ON.
4 INPUT SELECTOR key
Use to select input sources.
5 VOLUME CONTROL knob
6 PHONES jack
Use for headphone listening.
Standby mode
While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the
condition, the system can be turned ON by remote control unit.
6 EN
MUTE CLIP Input mode
indicator indicator indicators
SP MUTE
AUTO DETECT
A B CLIP
L C SW R
LFE
SL S SB SR
DSP DOLBY DIGITAL
96kHz fs DTS
ACTIVE EQ LOUDNESS
LOUDNESS DOLBY VIRTUAL STEREO INPUT MODE
BASS BOOST DSP ACTIVE EQ DIMMER
7 LOUDNESS key
&
Use to switch the status of LOUDNESS.
DOLBY VIRTUAL key
)
Use to select the Dolby Virtual Speaker and
the Dolby Headphone setting.
STEREO key
Use to switch the listen mode to STEREO.
ª
INPUT MODE key
Use to select the Input mode.
¤
BASS BOOST key
Use to select BASS BOOST setting.
DSP key
™
Use to select any of the DSP mode.
ACTIVE EQ key
Use to select ACTIVE EQ setting.
ª
DIMMER key
Use to select the REC MODE.
Use to adjust the brightness of the display.
ª
8 SOUND key
¡
Use to adjust the sound quality and the
ambience effects.
)
TONE key
Use to switch the status of TONE control.
)
SETUP key
¡
Use to select the speakers' settings etc.
Listen mode indicators
SLEEP indicator
DIGITAL DOLBY DIGITAL EX DTS 96/24 DOLBY H
DOLBY EX ES MATRIX6.1 DOLBY VS
6CH INPUT DOLBY PL II x ES DISCRETE6.1
Display
.
SOUND TONE SETUP
MULTI CONTROL
BAND AUTO/MONO MEMORY
¡
º
⁄
8)
¡
•
¡
£
⁄
&⁄
¡
&
STEREO NEO:6
96kHzfs
LOUDNESS SLEEP DSP MODE
AUTO
MEMORY
STEREO
TUNED
Frequency display
Input display
Preset channel display
Surround mode display
VOLUME CONTROL
INPUT
SELECTOR
AV AUX/GAME
LISTEN MODE
S VIDEO
BAND key
Use to select the broadcast band.
AUTO/MONO key
Use to select the auto or manual tuning
mode.
MEMORY key
Use to store radio stations in the preset
memory.
9 5/∞ keys
Use for selection adjustments during sound,
set up and preset channel functions.
0 MULTI CONTROL knob
Use to control a variety of settings.
! LISTEN MODE knob
Use to select the listening mode.
@ AV AUX/GAME key
Use to switch the input to AV AUX or GAME.
# AV AUX(S VIDEO, VIDEO, L-AUDIO-R)
jacks
AUTO indicator
MEMORY indicator
STEREO indicator
TUNED indicator
VIDEO L-AUDIO-R
¢
¢
¢
&
•
^)
^