Using Your Dryer - Maytag 7MMGD6630HC Use And Care Manual

USING YOUR DRYER

WARNING: To reduce the risk of fire, electric shock, or injury to
persons, read the Important Safety Instructions before operating
this appliance.
1.
Clean the lint screen
WER
Clean the lint screen before each load. Pull the lint screen straight
up. Roll lint off the screen with your fingers. Do not rinse or wash
screen to remove lint. Wet lint is hard to remove. Push the lint
screen firmly back into place.
For additional cleaning information, see "Dryer Care. "
2.
Load the dryer
Appearance may vary.
Open the door by pulling on the handle. Place laundry in the dryer.
Add a dryer sheet to wet load if desired. Close the door.
IMPORTANT: Do not tightly pack the dryer. Items need to tumble
freely. Tightly packing can lead to poor drying performance and may
increase wrinkling and tangling.
11-Jan-2019 10:47:53 EST | RELEASED
3.
Touch POWER/CANCEL to turn on the dryer.
4.
Appearance may vary.
Select the desired cycle for your load. See the "Cycle Guide"
for more information about each cycle. Not all cycles are on
all models. Press the Cycle Control Knob to activate the Extra
Power option, which provides an additional 10 minutes of cycle
time (including additional heat and tumbling, where applicable).
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Touch POWER/CANCEL
Select the desired cycle
E XT RA P OWE R
35