Kenwood DV-5050M Instruction Manual page 80

Kenwood multiple dvd vcd cd player instruction manual
Hide thumbs Also See for DV-5050M:
Table of Contents

Advertisement

Chapter 7 : Various Setups
Speaker level setting using Test Tone
Operation procedure
1.
Perform steps 1 and 3 of "Speaker Setting Custom".
2.
Press the cursor button to select the "Test" button.
÷ The Test Tone will be output from each speaker for
a specified period of time, in the sequence
beginning with the L CH speaker and ending with
the Surround R CH speaker.
÷ The speaker from which the Test Tone is being
output is indicated by the cursor on the screen.
3.
When the cursor moves to the speaker to be set, press
the ENTER button.
4.
Press the cursor left, right button to select the level to
be set, and press the ENTER button.
÷ Adjust so that the volume from all speakers is
identical.
5.
Press the cursor button to select "Exit", then press the
ENTER button.
80
b : "Speaker Setting Quick" (DV-5900M only)
¶ For the "Speaker Setting" when an AV amplifier
is connected digitally to the player, refer to the
k
instruction manual of the AV amplifier.
¶ Three kinds of speakers can be set, including the
"Center Speaker (C)", "Surround Speakers (SL/
SR)" and "SubWoofer (SW)".
Operation procedure
1.
While the player is in stop mode, press the SET UP
button and press the cursor up, down button to display
the "SOUND" menu of "SET UP MENU".
2.
Press the ENTER button to open the setup screen.
3.
Press the cursor cursor up, down button to select
"Speaker Setting (Quick)" in set up menu "SOUND",
then press the ENTER button.
Speaker Setting (Quick)
Test
L
C
SL
SW
C
L
SW
SL
4.
Place the cursor on the speaker name you want to set to
"Use" or "Do not use", then press the ENTER button.
5.
Each press of the ENTER button turns on and off the
corresponding speaker icon in the graphic room at
the lower half of screen alternately. When the selected
kind of speaker is to be used, the corresponding
speaker icon should be displayed.
6.
To set the use of other kinds of speakers, repeat step 4
for each of them.
7.
After completing the setting, place the cursor on "Exit"
and press the ENTER button.
Exit
R
SR
R
SR

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv-5900mDvf-j6050

Table of Contents