Cinema Voice Function; Down Mix Function - Kenwood DV-5050M Instruction Manual

Chapter 4: OSD Operation
÷ When a DVD recorded with Dolby Digital audio
(with 2 or more channels) is played, the "DOLBY
DIGITAL" indicator on the player main unit lights
up.

4-4-3 Cinema Voice function

This function to be used when words are hard to be
distinguished during playback of DVD recorded with
Dolby Digital Surround, Dolby Digital, DTS, or DVD
AUDIO* LPCM.
To use this function, it is required that the disc being
played provides the center channel audio.
*DVD AUDIO is DV-5900M only
÷ When the digital output terminal is used, the
"Digital Audio" setting should be set to "PCM"
or "Off".
Operation procedure
1.
Press the ON SCREEN button during playback of DVD,
then select the "SOUND" OSD by pressing the cursor
up/down button.
2.
Move the cursor to (Cinema Voice icon) by
Off
pressing the cursor left/right button, then press the
ENTER button.
÷ The icon can be selected only when the played
software is recorded with Dolby Digital Surround,
Dolby Digital, DTS, or DVD AUDIO* LPCM. (with
center channel).
3.
Select on or off by pressing the cursor up/down
button, then press the ENTER button.
44
4-4-4 Down Mix function (DV-5900M only)
This function is available with a DVD containing the
recording of multi-channel audio.
This function converts the multi-channel audio into 2-
channel audio and outputs to 6CH OUTPUT L/R
terminals.
Operation procedure
1.
Press the ON SCREEN button during playback of DVD,
then select the "SOUND" OSD by pressing the cursor
up, down button.
2.
Move the cursor to
pressing the cursor left/right button, then press the
ENTER button.
h
3.
Select on or off by pressing the cursor up/down
button, then press the ENTER button.
(Down mix icon) by
O f f