Connecting Other Devices - JVC LVT1286-003A Instructions Manual

Connecting up

Connecting other devices

This page is for when connecting the main unit with
other devices.
Connecting subwoofer
With an amplifier-built in subwoofer (sold separately), you can enjoy a more dynamic bass sound.
Refer to the manual of the subwoofer for details.
Connecting with other audio device
Output
Input
10
(continued)
– Do not turn on the power until the connection is complete –
Amplifier-built-in subwoofer
(sold separately)
Other audio
device
Audio cord (sold
separately)
Main unit
Audio cord (sold separately)
(If an audio cord comes with the amplifier-built-in subwoofer,
you can use the cord.)
When you want to hear sound from the subwoofer,
press S.WFR OUT on the remote control to display
"SUB WFR ON" (Sub Woofer ON) on the display
window on the main unit. Each time you press the
button, the display toggles between "ON" and "OFF".
NOTE
When "SUB WFR ON" is selected, bass sound from
the left and right speakers will be automatically
lowered and the bass sound will be emitted mainly
from the subwoofer.
Connecting with a digital device
Digital device
Input
(MD recorder etc.)
Output
Main unit
CAUTION
• For details of signals to be output, refer to page
30.
• If connecting the main unit with equipment with the
function of a Dolby Digital decoder, the setting in
"D. RANGE COMPRESSION" of "AUDIO"
(A page 30) will be invalid regarding sound from
the digital audio output of the main unit.
Connection
Main unit
To digital input terminal
Optical digital cord
(sold separately)