Advertisement
•
Avoid other sources of heat such as soffit vents, and window or door frames.
•
For accurate humidity readings, avoid placement near vegetation and lakes or other bodies
of water when possible.
•
Maximum transmission distance from your thermos-hygro sensor to your station, in open air
is 197 feet (60 meters).
•
Insert the mounting screw through the front of the transmitter and into the wall. Tighten the
screw to snug (do not over tighten).
Your station is designed for flexible placement on a desk or countertop.
•
Position within reach of an outlet that is always active. Some outlets in living rooms and in
bedrooms may only be active when the light switch is on.
•
Best reception occurs when only one wall is between your station and each sensor outside.
•
Position you station six feet from other electronics and wireless devices. If you suspect RF
(radio frequency) interference, simply move your weather station a few feet.
TIME: DOES THIS STATION HAVE ATOMIC TIME?
No, Time and Date are manually set.
1. Press the SET/AL SET button so the word "TIME" shows in front of the time.
2. With the word "TIME" showing, hold the SET/AL SET button to enter the
main Settings Menu.
3. Once the settings begin flashing, let go of the SET/AL SET button and
use the ARROW buttons to adjust, and SET/AL SET to confirm or exit.
Settings Menu order:
• 12/24 Hour Time
• Hour
• Minute
• Year
• Month
• Date
• Language (ENG, GER, FRE, SPA, ITA, DUT, DAN)
Language: When another language is selected, the weekday and menu
items will be presented in that language.
Weekday: Weekday sets automatically when Year, Month and Date are set.
WHERE TO I PLACE MY STATION?
HOW DO I MANUALLY SET THE TIME?
3 |
P a g e
Advertisement
