Connecting External Digital Audio Devices - JVC CA-NXF3 Instructions Manual

Preparation (continued)
Connecting a TV with the [HDMI
MONITOR OUT] terminal
This system can output uncompressed digital
video signals to a TV compatible with HDMI (High
Definition Multimedia Interface).
TV
To an HDMI input terminal
HDMI cable (not supplied)
NOTE
• The HDMI video signal type can be checked with
the "HDMI" indicator in the display window.
(Refer to "Selecting the video signal type" on
page 11.)
• If the picture is distorted while an HDMI TV is
connected, turn off the main unit and turn it on
again.
• A TV compatible with HDCP (High-Bandwidth
Digital Content Protection) can also be con-
nected to the [HDMI MONITOR OUT] terminal,
so that the uncompressed HD video signal type
can be output as well.
• This system is compatible with some basic func-
tions of HDMI CEC. (Refer to page 61.)
9
Do not connect the power cable until all other connections have been made.
Main unit
(rear view)
Connecting external digital
audio devices
Output MD player or
satellite receiver
Main unit
(rear view)
Input
Optical digital cable
(not supplied)
To an optical digital
input terminal
Input
AV amplifier with
a built-in decoder
NOTE
• You can output the audio signal from the
[DIGITAL OUT] terminal when "DVD", "USB" or
"DGTL IN" is selected as the source in the dis-
play window.
• When "DGTL IN" is selected as the source in the
display window, digital audio from the [DIGITAL
OUT] terminal is decoded to a linear PCM sig-
nal.
To an optical digital
output terminal
Optical digital cable
(not supplied)
Output