Advertisement
Attaching the Hanger Tubes and Seat
Step 1.
rear
short
CHECK that the hanger tubes
are secure in hubs by pulling
firmly on them.
Step 2.
The seat
back must overlap armrests,
as shown enlarged at right.
Step 3.
Step 4.
Do not use
swing if the seat wire is not
securely attached. If seat can
recline backwards between
the hanger tubes, check the
wire assembly.
All manuals and user guides at all-guides.com
7
Attaching the Waist Belt
DO NOT separate
Step 1.
Step 2.
check
CHECK
The belt should
not slip through the buckle.
8
Advertisement
