Attaching the Legs
Step 1.
The double buttons
must fit into the channels
inside the housings.
Step 2.
CHECK that the legs are properly attached by twist-
ing them in the housings. They should resist twist-
ing. If a leg twists and buttons come out of their
holes, insert leg into the housing again. Be sure to
align BOTH double buttons with BOTH sets of
channels inside the housings.
Attaching the Feet
Step 1.
All manuals and user guides at all-guides.com
5
Step 2.
shown at right,
not
short side of tube
CHECK that feet are secure
by wiggling the feet.
Step 3.
Attaching the Base Tubes
Step 1.
exactly as shown.
Step 2.
CHECK that all tubes are
securely attached.
CHECK that the parts of the
frame are assembled in the
positions shown.
as
6