Table of Contents
Advertisement
.
A. The seat is covered by foreign matters or the seat
9. Cover fails to be
is wet
closed/opened
B. The toilet cover is interfered by people at the
open/close process before
10.Cover unable to
A. Users are not seated yet or leave the sensing area
be opened/
B. The function of "automatic cover-turning" of
closed
remote controller is deactivated
automatically
C. The toilet is in the process of flushing
11. Night light out of
A. The night function is turned off
work
B. The indoor light is too bright
12.UV sterilization
A. Human body is sensed by seat.
function not work
B. The seat is covered by foreign matters or the seat
is wet
A. Out of battery
13.
Remote failure
fails to display
B. Battery polarities are mounted reversely
C. The remote controller is not woken up
14.Remote
A.
Lower battery
controller fails to
control the toilet
B.
The remote controller is too far from the toilet
C.
The toilet is not yet powered on
D.
The toilet itself is at standby mode
E.
The toilet is not connected to the remote controller
If this toilet is to be repaired and maintained, firstly you have to:
Disconnect the power plug of toilet.
If necessary, turn off the water valve.
Kohler Co.
A. Remove the foreign matters or dry the seat
B. Use the remote controller to open/close the toilet
cover or do it manually until it works normally.
The switch of covershall not be stopped during
the open/close process
A. Please be seated yet or leave the sensing area
B. Refer to "Guide on setting of remote controller"
C. Wait until the flushing of toilet is completed
A. Check the section of night light at "auxiliary
keyboard function" to activate the night function
B. The night function is turned off
A. Please activate the function of UV sterilization
again after leaving
B.Remove the foreign matters or dry the seat
A. Replace by new battery
B. Reinstall properly
C.
Touch the screen of remote controller
Sit near to the toilet or be seated
Press Wake up key of remote controller
A.
Replace battery by referring to the section of
"Usage and replacement of battery for remote
controller"
B.
Check the section of "Communication between
remote controller and this machine", and get
close to the toilet
C. Power on the toilet body
D. Press Power button at the side. Wake up the
product
Check the section of "Communication between
E.
remote controller and this machine", and
connect the toilet and the remote controller
15
1373184-IN01-A
Advertisement
Table of Contents
