Warning Indications - JVC PICSIO GC-FM2 Detailed User Manual

Hd memory camera waterproof with audio recording
Hide thumbs Also See for PICSIO GC-FM2:
Table of Contents

Advertisement

Further Information
Trouble
The LCD monitor is
difficult to see.
A band of bright light
appears on the LCD
monitor.
The unit operates
slowly when switching
between video mode
and still image mode,
or when switching the
power on or off.
The unit heats up.

Warning Indications

Indication
SET DATE/TIME!
FORMAT ERROR!
MEMORY CARD ERROR!
NOT FORMATTED
RECORDING FAILURE
UNSUPPORTED SCENE
(FILE)!
CHECK CARD'S WRITE
PROTECTION SWITCH
INSUFFICIENT
AVAILABLE SPACE
FILE QUANTITY LIMIT
EXCEEDED
NUMBER OF FOLDERS
OVERFLOW
The LCD monitor may not be clearly visible if used in
bright areas such as under direct sunlight.
Change the direction of this unit to prevent the light
source from coming into view. (A band of bright
light may appear when there is a bright light source
near this unit, but this is not a malfunction.)
It is recommended that you copy all video/still
image/audio files onto your computer, and erase the
files from this unit. (If there are many recorded files
on this unit, it takes time for the unit to respond.)
This is not a malfunction. (This unit may become
warm when used for a long time.)
Charge the battery before setting the clock.
Check the operating procedure, and perform once again.
Turn off this unit, and turn it on again.
Turn off this unit, and turn it on again.
Re-insert the SD card.
Remove any dirt from the SD card terminals.
If the above does not solve the problem, back up your
files and execute [FORMAT SD CARD] in the Basic Settings.
(All data will be deleted.)
Select [OK] then select [YES] on the [DO YOU WANT TO
FORMAT MEMORY CARD?] screen. (All data will be
deleted.)
Turn off this unit, and turn it on again.
Use files recorded with this unit. (Files recorded with
other devices than this unit may not be playable.)
Release the write protection switch of the SD card.
Delete files, or move files to a computer or other devices.
Replace the SD card with a new one.
!
Move the files or folders to a computer or other
device. (Back up your files.)
#
Select [FILE & MGMT NUMBR] in [FORMAT SD CARD]
of the Basic Settings. (All data on the SD card will be
deleted.)
48
Action
Action
Page
30, 39
Page
18
45
12
45
39
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

0810ymh-al-otGc-wp10Gc-fm2 uGc-wp10 u

Table of Contents