Loading/Unloading A Memory Card - JVC GR-D390EK Instructions Manual

Loading/Unloading A Memory
Card
The provided memory card is already inserted in
the camcorder at the time of purchase.
Card Cover (
Memory card
Write/erase protection tab
1
Make sure the camcorder's power is off.
2
Open the card cover (
3
To load a memory card, firmly insert it with
its clipped edge first.
To unload a memory card, push it once. After
the memory card comes out of the camcorder,
pull it out.
Do not touch the terminal on the reverse side of
the label.
4
Close the card cover.
To protect valuable files (available only for
SD Memory Card)
Slide the write/erase protection tab on the side
of the memory card in the direction of "LOCK".
This prevents the memory card from being
recorded over. To record on this memory card,
slide the tab back to the position opposite to
"LOCK" before loading it.
NOTES:
Some brands of memory cards are not compatible
with this camcorder. Before purchasing a memory
card, consult its manufacturer or dealer.
Before using a new memory card, it is necessary
to format the card. (
ATTENTION:
Do not insert or remove the memory card while the
camcorder is turned on, as this may cause the
memory card to be corrupted or cause the
camcorder to become unable to recognise whether
or not the card is installed.
)
Label
Clipped edge
).
pg. 31)
GETTING STARTED
19
EN