Table of Contents
Advertisement
A-2: Installation in Intel RST Premium With Intel Optane System Acceleration mode
please follow the steps below:
1. After system restarts, go to the BIOS Setup, make sure CSM Support under the BIOS menu is disabled.
2. Go to
you want to enable the Optane
Port 21 to RST Controlled; to enable the Optane
Storage Dev on Port 9 to RST Controlled.
3. Enter the operating system, launch the Intel
®
™
enable Intel
Optane
Memory on the Intel
4. If you install more than one Optane
5. Follow the on-screen instruction to continue the installation and then restart the system when completed.
™
An Optane
memory cannot be used to accelerate an M.2 PCIe SSD.
If more than one Optane
SATA-based boot drive. The other(s) can only be used as data drive(s).
Do not abruptly remove the Optane
functioning correctly.
If you want to change/remove the Optane
Storage Technology or Intel(R) Optane
After enabling the Optane
and make sure Use RST Legacy OROM is disabled. If
™
memory installed in the M2Q_32G connector, set PCIe Storage Dev on
™
memory installed in the M2A_32G connector, set PCIe
®
Rapid Storage Technology utility from the Start menu, and then
®
™
Optane
Memory screen.
™
memory, please select which one you are going to use.
™
memory is installed, you can select only one of them to accelerate your
™
memory. Doing so will cause the operating system to stop
™
memory, you must disable it using the Intel
™
™
memory, the related BIOS settings will remain even after a BIOS update.
- 44 -
®
Rapid
Hide quick links:
Advertisement
Table of Contents
