Summary of Contents for Heat Controller COMFORT-AIRE BG-81H
Page 1
BG-81H BG-101H BG-103H BG-123H (BG-81H) BG-143H (BG-101H) (BG-103H) (BG-123H) Please read this manual carefully and thoroughly before operating this unit.
Page 2
Window-Type Air Conditioner Owner’s Manual TABLE OF CONTENTS Window-Type Air Conditioner Owner’s Manual TABLE OF CONTENTS FOR YOUR RECORDS Safety Precautions......3 Write the model and serial numbers here: Model # FOR YOUR RECORDS Prior to Operation ......7 Serial # You can find them on a label on the side of each unit. Safety Precautions......3 Write the model and serial numbers here: Dealer's Name...
Safety Precautions Safety Precautions To prevent injury to the user or other people and property damage, the following instructions must be followed. ■ Incorrect operation due to ignoring instruction will cause harm or damage. The seriousness is classified by the following indications. This symbol indicates the possibility of death or serious injury.
Page 4
Do not place heavy object on the power cord and ensure that the cord is no compressed. Turn off the power and breaker when cleaning the unit.
Page 5
Keep level parallel when installing the Install the product so that the noise or hot product. air from the outdoor unit may not disturb the neighbors.
Page 6
Operation without filters or with a It contains containments and my make you sick. clogged filter will cause failure. Do no insert hands or objects through the air inlet or outlet during operation. Otherwise, it may harm your health. If you ingest the liquid from the batteries, contact your local poison control.
Page 9
Otherwise the plug can become damaged. Do not remove, modify or immerse this plug. If this device trips, the cause should be corrected before further use. Periodically examine the cord for any damage. Do not use this product in the event the shields become exposed.
Page 10
properly rated for the correct voltage and amperage or shown in the table on page 3.
Page 11
With the HCI Sleeve (optional accessory), you can maintain the best performace of the new air conditioner. (FIG. 2)
Page 12
If you decide to keep the existing wall sleeve, you have to redirect the louvers at the back of the wall sleeve using the procedure based on the wall sleeve’s brand manufacturer. The use of pliers is recommended. If you DO NOT redirect, you run the risk of poor performance or product failure.
Page 13
If you are using the new sleeve, skip to step 3.
Page 18
The controls will look like the following:...
Page 19
The remote control and control panel will look like the following picture:...
Page 21
torn 3. Wash the filter using lukewarm water below 104°F (40°C).