Panasonic KX-TG9385BXT Service Manual page 52

KX-TG9385BXT/KX-TGA939BXT
11.2.3. Commands
See the table below for frequently used commands.
Command name
rdeeprom
readid
writeid
setfreq
hookoff1/hookoff2
hookon1/hookon2
getchk
wreeprom
bursttx
textrx
tph
tpl
Function
Read the data of EEPROM
Read ID (RFPI)
Write ID (RFPI)
Adjust Frequency of RFIC
Off-hook mode on Base Line1 & Line2 Type "hookoff1" for Line1.
On-hook mode on Base Line1 & Line2 Type "hookon1" for Line1.
Read checksum
Write the data of EEPROM
Burst TX mode
Test RX mode
High TX mode
Low TX mode
Example
Type "rdeeprom 00 00 FF", and the data from address
"00 00" to "FF" is read out.
Type "readid", and the registered ID is read out.
Type "writeid 00 18 E0 0E 98", and the ID "0018 E0 0E
98" is written.
Type "setfreq nn".
Type "getchk".
Type "wreeprom 01 23 45". "01 23" is address and "45"
is data to be written.
Type "bursttx"
Type "testrx"
Type "tph"
Type "tpl"
52