Ironman Fitness Alpine Owner's Manual page 9

Assembly
Figure 7
Step 1:
Locate console (F), and connect sensor
wires (B5 and B6) to the wires coming from
the console.
Step 2:
Note: Screws (F2) will already be attached
on the backside of the console. Remove
before sliding onto console tube.
Gently push all of the wires into the console
tube. Slide console onto the console tube.
Secure using two screws (F2). Place water
bottle into the water bottle holder.
You have completed assembly of your Alpine Stepper.
Figure 7
CONGRATULATIONS!
9